Inspection Report

Business Name
First Watch

Business Address
4955 S ALMA SCHOOL RD CHANDLER AZ 85248

Permit Number
FD-36059

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
2/7/2025

Grade
Not Participating

Priority Violation
3

Inspection Status
Completed

Violations

Violation #: 8

Description: Hands Clean and Properly Washed

Comments:

PRIORITY VIOLATION-2-301.14 - Priority: When to Wash. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing.

Addl Notes: Observed employee touch face with gloved hand/arm then proceed to prepare food items for the establishment. Employee properly washed hands at handwash sink at time of inspection. Discussed the importance of proper hand washing and when hand washing is required with the person-in-charge (PIC). Hands must be washed at any time contamination occurs and when changing tasks. Corrective Action: Corrected at time of inspection.

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14 - Priority: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.

Addl Notes: Observed cooked onions with an internal temperature range of 75F-80F on a rack in the walk-in cooler. Per PIC and label on the container, the onions were cooked, placed a lid on the container, and have been cooling in the walk-in for over 4 hours. The cooked onions were embargoed at the time of inspection. Discussed proper cooling with the PIC. Foods must be cooled from 135F-70F in the first 2 hours and from 70F-41F in the next 4 hours for a total of 6 hours. Corrective Action: Corrected at time of inspection.

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

PRIORITY VIOLATION-3-501.18 - Priority: Ready-To-Eat Time/Temperature Control for Safety Food, Disposition. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources.

Addl Notes: Observed cooked onions with a discard date of 2/3/2025 located in the walk-in cooler. Discussed date marking procedures with the PIC. All RTE/TCS foods past 7 days of preparation were discarded by PIC at the time of inspection. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed cooked onions in a deep plastic container with a tight fitted lid that had an internal temperature range of 65F-70F. Per PIC, the onions were cooling for less than 6 hours. Also observed portion and wrapped ham with an internal temperature of 50F. All TCS foods being cooled in deep containers were transferred to sheet pans to allow for rapid cooling. TCS foods must be cooled in: uncovered/loosely covered, shallow containers less than 4 inches deep, in equipment designed to rapidly cool, by using an ice bath, by using ice as an ingredient, or another effective means. Foods prepared from ingredients at room temperature must be cooled within 4 hours to 41°F or less. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.