Inspection Report
Omni Scottsdale Resort & Spa Montelucia
4949 E LINCOLN DR PARADISE VALLEY AZ 85253
FD-36661
Food Establishment - Eating & Drinking
Food Routine Inspection
5/15/2026
Not Participating
1
Completed
Violations
Violation #: 16
Repeat Violation
Description: Food-Contact Surfaces: Cleaned and Sanitized
Comments:
PRIORITY VIOLATION-4-703.11 - Priority: Hot Water and Chemical-Methods; Sanitizing Food Contact Surfaces. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.
Addl Notes: Observed high temperature sanitizing dish machine sanitizing cups at time of inspection. Observed maximum surface temperature after a full cycle, of 136°F with establishment's min/max thermometer. Observed dish machine log from this morning list a temperature of 126°F. A utensil temperature of at least 160°F must be reached during the final rinse cycle for adequate sanitation. All dishes will be sanitized in the 3-compartment sink until the dish machine is fully operational with a final rinse temperature that achieves a utensil surface temperature of 160°F, or the equipment can be switched to chemical sanitizing (50-100 PPM chlorine) with low temperature water. Provided electronic version of MCESD Hi-Temp Sanitizing Dish Machine logs. Ensure staff is trained regarding proper temperatures and sanitizer concentrations. Corrective Action: Corrected at time of inspection. Repeat Violation: 2nd.
Comments/Details
Predefined Comment: No County legal action will result from this inspection.
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.