Inspection Report

Business Name
Anaya's Fresh Mexican Restaurant
Business Address
5830 W THUNDERBIRD RD GLENDALE AZ 85306
Permit Number
FD-38678
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
9/16/2025
Grade
Not Participating
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed cooked rice (113-115°F) cooling on a speed rack outside of the walk-in. Staff stated the rice had been cooked in the last hour. The pans of rice were immediately moved into the walk-in for active cooling. Cooling foods must be ACTIVELY cooled after reaching 135°F. Time Temperature Control for Safety (TCS) foods must cool from 135°F to 70°F within 2 hours and from 135°F and 41°F or less within a total of 6 hours. This establishment is using cooling logs on the walk-in door. Discussed how to use cooling logs effectively. Corrective Action: Corrected at time of inspection.

Violation #: 41

Description: Wiping Cloths; Properly Used and Stored

Comments:

3-304.14 - Core: Wiping Cloths, Use Limitation Addl Notes: Observed wet wiping cloths sitting on surfaces throughout the facility. All wet wiping cloths must be stored in sanitizer buckets with approved sanitizer concentrations. Only sanitizing solution is to be used. Do not use soap. Wiping cloths were placed in sanitizer buckets with approved sanitizer concentrations at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details


No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.