Inspection Report

Business Name
The Living Room
Business Address
20751 N PIMA RD SCOTTSDALE AZ 85255
Permit Number
FD-39756
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
5/12/2025
Grade
Not Participating
Priority Violation
3
Inspection Status
Re-inspection required

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: At in use main warewashing machine, no chlorine sanitizer detected at dishware surfaces. After several attempts to prime machine, unable to obtain correct sanitizer concentration. Discontinue use of main warewashing machine until repaired. Use glass warewashing machine or 3-compartment sink until repaired. Discussed more frequent monitoring of sanitizer solution, especially at start of day after periods of inactivity. Repair company was called at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: On sushi line, in prep table cooler two drawers, crab mix and spicy tuna mix with internal temperatures of 49*F-51*F. Per employee, mixes were prepared two days ago and maintained in prep table cooler. Crab mix and spicy tuna mix were discarded. See embargo form. Discontinue use of prep table cooler drawers for storing of TCS foods until repaired. Repair company was called at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

PRIORITY VIOLATION-7-204.11 - Priority: Sanitizers, Criteria-Chemicals

Addl Notes: At in use main bar warewashing machine, chlorine sanitizer with a concentration >100ppm at dishware surfaces. After machine was turned off and drained and restarted, chlorine sanitizer with a concentration of 50-100ppm. Discussed more frequent monitoring of sanitizer solution, especially at start of day and after periods of inactivity. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Walk in cooler with ambient air temperature of 44*F-46*F, taken with inspector min/max thermometer. Internal temperatures of TCS foods were 42*F-43*F. Repair company was called at time of inspection. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Correct prior to re-inspection.

Comments/Details


No County legal action will result from this inspection.
Reviewed with managers: fruit rinds at bar.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.