Inspection Report

Business Name
First Watch

Business Address
3215 E CAMELBACK RD PHOENIX AZ 85018

Permit Number
FD-42991

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/30/2025

Grade
Not Participating

Priority Violation
0

Inspection Status
Completed

Violations

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (B) - Core: Cooling Methods; Covered and Properly Arranged Containers. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed gravy cooling in an ice bath but the ice was only making contact with the bottom of the gravy pan (container of ice not big enough to cool the whole gravy pan). Also reviewed cooling procedures for cooked onions in which according to the person in charge, are left out at room temperature until they are cool to the touch. After the cooked onions are cool to the touch, they are panned, wrapped and placed in the walk in cooler to finish off cooling (possibly allowing the heat to be trapped not allowing to properly cool down in the appropriate cooling time/temperature parameters). TCS foods must be cooled in: uncovered/loosely covered, shallow containers less than 4 inches deep, in equipment designed to rapidly cool, by using an ice bath, by using ice as an ingredient, or another effective means. Person in charge made the ice bath bigger and state they would cool the onions uncovered and in shallow pans until they are completely cooled down to 41*F or lower. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Reviewed cleaning procedures for the ice packs used on prep table coolers.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.