Inspection Report

Business Name
Grand Canyon University

Business Address
5902 W INDIAN SCHOOL RD PHOENIX AZ 85033

Permit Number
FD-44836

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/23/2026

Grade
Not Participating

Priority Violation
1

Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-602.11 (E) - Core: Equipment Food - Contact Surfaces and Utensils-Frequency; Non-TCS. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed some organic matter buildup on the hand-held beverage dispensers at the bar. Discussed with person in charge to clean the nozzles on a more frequent basis to prevent the accumulation of organic matter inside the nozzles. All food-contact surfaces must be cleaned to sight and touch. The person in charge cleaned and sanitized the beverage nozzles. Food-contact surfaces were properly sanitized at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed sliced ham, sliced tomatoes, shredded cheese and nacho cheese with internal temperatures as measured using a probe thermometer ranging from 46°F - 49°F inside of a refrigerated prep top unit at the cooking line. A min-max thermometer was placed into the unit and allowed to stabilize for 15 minutes. The ambient air temperature in the unit was steady at 45°F. According to the person in charge, all TCS foods in the unit had been in the unit for less than 4 hours and were moved to the walk-in cooler to rapidly chill down to 41°F. The establishment has sufficient cold holding capacity to operate safely. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 43

Description: In-Use Utensils; Properly Stored

Comments:

3-304.12 - Core: In-Use Utensils, Between-Use Storage Addl Notes: Observed several scoops and spatulas in a container of hot water on the stove. The temperature of the water as measured using a probe thermometer was at 112°F. Discussed with person in charge that in-use utensils must be stored in a clean, dry location; in running water; or in hot water above 135°F. If utensils are stored in food, the handles must be stored above the surface of the food. All in-use utensils were properly stored at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 44

Description: Utensils, Equipment and Linens; Properly Stored, Dried, Handled

Comments:

4-901.11 - Core: Equipment and Utensils, Air-Drying Required Addl Notes: Observed several clear plastic containers at the clean dishes rack that were stacked together with observable films of water trapped between the nested dishes. The person in charge separated the nested dishes so they could finish air-drying prior to stacking together. All equipment and food contact surfaces must be air-dried after properly cleaning and sanitizing. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Discussed when to wash, dishwasher at the bar and date marking.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.