Inspection Report

Business Name
Homewood Suites

Business Address
66 S Rockford DR TEMPE AZ 85288

Permit Number
FD-45805

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
4/9/2024

Grade
B

Priority Violation
0

Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

Priority Foundation-4-501.112, Pf: Mechanical Warewashing Equipment, Hot Water Sanitization Temperatures. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.>>>Observed employees washing dishes; the inspector's min/max thermometer was run with the dishes 5 consecutive times and the maximum observed internal water temperature at the plate level was 147.7*F. The establishment did not have an irreversible registering temperature indicator/thermometer at time of inspection. Person in charge was informed that for hot water sanitization in a warewashing machine there must be an observed internal water temperature of at least 160*F at the plate level. The 3-compartment sink was set up with quaternary ammonium sanitizer with a concentration of 200 ppm and dishes were sanitized in the 3-compartment sink.

Correct By: Corrected At Time Of Inspection

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

Priority Foundation-4-302.13, Pf: Temperature Measuring Devices, Manual and Mechanical Warewashing. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.>>>The establishment did not have a functioning irreversible registering temperature indicator/thermometer at time of inspection. The establishment has a high temperature sanitization warewashing machine. The establishment must have a functioning available irreversible registering temperature indicator/thermometer to verify that their high temperature sanitization warewashing machine is reaching a minimum internal water temperature of 160*F at the plate level during the sanitizing cycle. Establishment must either repair or replace their non-functioning irreversible registering temperature indicator/thermometer. RE-INSPECTION ON OR BEFORE 04/19/24.

Correct By: Correct Prior To Reinspection

Comments/Details

This establishment received a(n) B Grade and had 1 Priority, 1 Priority Foundation violations on this inspection.

Reviewed: when to wash hands

A copy of the inspection report was emailed.

No County legal action will result from this inspection.

On July 1st, 2023, the Environmental Services Department started emailing permit card(s) and permit invoice(s) to permittees. We need a current and accurate email address on file to ensure you receive a copy of your permit card and invoice(s) upon renewal.

If you are unsure whether your email address is accurate, you may:
• Contact your inspector using the phone number or email on your last inspection report to review, or
• Contact the Department using the email addresses below,
o Envquickservicerestaurants@maricopa.gov (facilities such as fast-food)
o Envfullservicerestaurants@maricopa.gov (facilities that are full-service restaurants)
o Envretailgrocery@maricopa.gov (facilities like grocery stores or retail food markets)
o Envspecialtyprograms@maricopa.gov (mobile food/special events/plan review)
If you need to update your email address and/or other contact information, please submit an administrative change request form at the below website:
https://www.maricopa.gov/FormCenter/Environmental-Services-16/Administrative-Change-Request-Form-181.

Award: B,Food Manager Licenses: 1,Signer: Kathryn Scopa

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.