Inspection Report

Business Name
Safari Bakery and Cafe

Business Address
5042 E McDowell RD Phoenix AZ 85008-4230

Permit Number
FD-48607

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
8/6/2025

Grade
Not Participating

Priority Violation
1

Inspection Status
Re-inspection required

Violations

Violation #: 2

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: Observed no certified food protection manager onsite at the time of inspection. Predefined Comment: A Certified Food Protection Manager (CFPM) is required to be on the premises during all hours of operation. Corrective Action: Correct prior to next routine inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed TCS food items with internal temperatures between 55-67F in the single door reach-in cooler in the back kitchen. TCS food items included cooked ground beef, cooked green beans, raw shelled eggs, and dairy milk. The person in charge stated the food items had been placed into the reach-in cooler approximately 2.5 hours ago. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Predefined Comment: All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed single door reach-in cooler with minimum ambient temperature of 55F as measured by inspector thermometer. The person in charge discontinued use of the reach-in cooler pending service repairs. Predefined Comment: Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Correct prior to re-inspection.

Violation #: 46

Description: Gloves Used Properly

Comments:

MCEHC Chap. 8, Sec. 2, Reg. 5a - Latex gloves may not be used in direct contact with food. Addl Notes: Observed establishment utilizes latex gloves for food handling. Discussed restricted use of latex gloves for food handling. The person in charge discontinued use of latex gloves at the time of inspection. Predefined Comment: Latex gloves are not approved for food handling. Corrective Action: Corrected at time of inspection.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.
Discussed obtaining additonal probe food thermometer and to maintain in a a clean easily accessible area.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.