Inspection Report

Business Name
Loco Patron Restaurant

Business Address
14950 N NORTHSIGHT BLVD SCOTTSDALE AZ 85260

Permit Number
FD-55746

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
12/9/2025

Grade
Not Participating

Priority Violation
0

Inspection Status
Re-inspection required

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

6-301.14 - Core: Handwashing Signage. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: No handwashing signage in womens restroom that employees use. Provide handwashing signage by next routine inspection. Corrective Action: Correct prior to next routine inspection.

Violation #: 38

Repeat Violation

Description: Insects, Rodents and Animals not Present

Comments:

6-501.115 - Priority Foundation: Prohibiting Animals Addl Notes: ***Second Consecutive Violation*** At start of inspection, several birds observed in establishment. Fly fans over bar turned on, but front door and side door open, without fly fans. Discussed removal of birds from establishment. Establishment must be maintained free of pests and all pest control measures must be conducted by a licensed pest control specialist. Corrective Action: Corrected at time of inspection.

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-101.19 - Core: Nonfood-Contact Surfaces Addl Notes: At bar, sliding doors of coolers repaired with duct tape and on cook line, rolling cart with duct tape on handle. Remove all duct tape and repair equipment with smooth easily cleanable surfaces. NonFOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. Corrective Action: Correct prior to next routine inspection.

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

4-302.14 - Priority Foundation: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: For bar and main warewashing machines, no test strips available for monitoring sanitizer solution.Test strips are required for any sanitizers used with food contact surfaces. Provide sanitizer test strips within 10 days re-inspection. Corrective Action: Correct prior to re-inspection.

Violation #: 55

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-501.12 - Core: Cleaning, Frequency and Restrictions Addl Notes: Throughout establishment, behind cold holding equipment at bar, in front area with large kegs, in walk in cooler under shelving, throughout kitchen behind equipment and along cove base throughout establishment, accumulation of food and grease residues. Physical facility are to be cleaned frequently enough to prevent accumulation of dirt, organic matter, and food debris. Clean physical facility prior to next routine inspection. Corrective Action: Correct prior to next routine inspection.

Comments/Details

No County legal action will result from this inspection.
Reviewed with employees: storing of in use utensils, drainage at handwashing sink with beer kegs.

Ensure all employees working with food obtain food worker certification from ANSI certified online site.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.