Inspection Report

Business Name
Tim Finnegans
Business Address
17045 N 59TH AVE GLENDALE AZ 85308
Permit Number
FD-59757
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
7/2/2025
Grade
Not Participating
Priority Violation
1
Inspection Status
Re-inspection required

Violations

Violation #: 2

Repeat Violation

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: SECOND CONSECUTIVE. No certified Food Manager was present at the time of inspection. In Compliance with the Food Code, Maricopa County requires a Food Manager present during operating hours. Emailed Maricopa Policy changes and additional resources on where to acquire a Food Manager Certification Corrective Action: Correct prior to next routine inspection.

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: SECOND CONSECUTIVE. Observed shredded cheese (55°F), bread pudding (54°F), cooked ground meat (55°F), various dairy-based sauces (56°F), and salsa (52°F), cold holding above 41°F, in the standing refrigerator nearest the ice chest. The standing refrigerator measured 56.3°F with the min/max thermometer. Staff stated all food had been placed in the standing refrigerator at noon today (1 hour before temperature measurement). Staff moved all Time Temperature Control for Safety (TCS) foods to alternative refrigerators at time of inspection. Except during preparation, cooking, cooling or when time is used as a control, all TCS foods must be maintained at 41°F or below. Discussed the importance of routinely checking food temperatures. Corrective Action: Corrected at time of inspection

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed the standing refrigerator near the deep refrigerator with TCS foods measuring above 41°F. Staff moved all TCS foods, which had been in the refrigerator for less than 1 hour, to alternative refrigerators at time of inspection. The standing refrigerator measured 56.3°F on the min/max thermometer. Staff plan to have someone fix the standing refrigerator so that it is able to maintain temperatures at or below 41°F. A reinspection will occur on this unit in 10 days. Corrective Action: Correct prior to re-inspection.

Violation #: 39

Repeat Violation

Description: Contamination Prevented during Food Preparation, Storage and Display

Comments:

3-307.11 - Core: Miscellaneous Sources of Contamination Addl Notes: THIRD CONSECUTIVE. Observed cracking foam insulation on the internal side of the lid of the deep freezer. Discussed removing and/or replacing the cracking foam from the lid of the deep freezer unit, due to the risk of physical contamination. No open foods were stored in the deep freezer at the time of inspection. No direct contamination of foods was observed. Discussed physical contamination risks with staff. Corrective Action: Correct prior to next routine inspection.

Comments/Details


No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.