Inspection Report

Business Name
King Wong Chinese Food

Business Address
5219 S 7TH ST PHOENIX AZ 85040

Permit Number
FD-61934

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
9/24/2025

Grade
Not Participating

Priority Violation
1

Inspection Status
Completed

Violations

Violation #: 2

Repeat Violation

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: Observed no Certified Food Manager (CFM) onsite at time of inspection. Person in charge (PIC) was unable to produce a valid certified food protection manager certificate. A Certified Food Protection Manager (CFPM) is required to be on the premises during all hours of operation. Provide a CFPM onsite by next routine inspection. **3rd Consecutive Violation** Corrective Action: Correct prior to next routine inspection.

Violation #: 10

Repeat Violation

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed designated handsink basin blocked by plastic tubs and dishes at time of inspection. Discussed hand sink requirements with PIC. Handwash sinks must be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities must be maintained in a condition that promotes handwashing. PIC will ensure establishment discontinues use of handwash sink for all activities that are not for handwashing. PIC relocated all items blocking handwash sink at time of inspection. **2nd Consecutive Violation** Corrective Action: Corrected at time of inspection.

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed all the knives stored on a magnetic strip above the 3-comp sink with dried on food debris stored as clean on the food-contact surfaces at time of inspection. Discussed cleaning frequency of food-contact surfaces with PIC. All food-contact surfaces must be cleaned to sight and touch. PIC relocated all food-contact surfaces to warewashing area to be washed, rinsed, and sanitized at the time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed the following TCS food: cooked shrimp (53'F), cooked noodles (54'F), cooked beef (49'F), and pooled eggs (51'F) being stored in the main prep table at time of inspection. Per PIC, these items were stored in the prep table overnight. Discussed cold-holding parameters with PIC. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. All TCS foods improperly cold held were discarded by PIC at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 43

Description: In-Use Utensils; Properly Stored

Comments:

3-304.12 - Core: In-Use Utensils, Between-Use Storage Addl Notes: Observed a pair of tongs, a scooper, and a large spoon actively in-use and being stored inside a bucket of water (76'F). Per PIC, the utensils are used for soup and rice. Discussed proper storage of in-use utensils with PIC. In-use utensils must be stored in a clean, dry location; in running water; or in hot water above 135°F. If utensils are stored in food, the handles must be stored above the surface of the food. All in-use utensils were properly stored at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Of Note: Discussed labeling requirements for chemical containers with PIC.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.