Inspection Report
Starbucks Coffee #54261
18450 N 32ND ST PHOENIX AZ 85032
FD-65556
Food Establishment - Eating & Drinking
Food Routine Inspection
10/13/2023
Not Participating
2
Completed
Violations
Violation #: 16
Description: Food-Contact Surfaces: Cleaned and Sanitized
Comments:
PRIORITY VIOLATION-4-501.111, P: Manual Warewashing Equipment, Hot Water Sanitization Temperatures. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.
Observed the Hot water sanitizing dishwasher to have a maximum temperature of 151.1F, measured with a calibrated min/max thermometer. The minimum temperature required for hot water sanitization is 160F. Use 3 comp sink to manually wash/rinse/sanitize wares until the dishwasher is repaired and reaching the correct temperature.
PRIORITY VIOLATION-4-501.114, P: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.
Observed that the sanitizer dispenser in the 3 comp sink was not dispensing sanitizer, verified by appropriate testing strip. QAT sanitizer must test between 200ppm and 400ppm to properly sanitize wares. Manually add sanitizer to the 3 comp sink sanitizing basin and test to verify concentration. Have dispensing unit repaired to dispense at the proper concentration.
Correct By: Corrected At Time Of Inspection
Violation #: 48
Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips
Comments:
Priority Foundation-4-302.13, Pf: Temperature Measuring Devices, Manual and Mechanical Warewashing. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.
No thermometer or temperature measuring device for hot water sanitization (i.e. high-temp dishwasher) was available to test the water of the high temp sanitizing dishwasher. A temperature test device must be available to check water temperature for sanitization to verify that the minimum temperature reaches 160F. Will reinspect within 10 days.
Correct By: Correct Prior To Reinspection
Comments/Details
Proof of obtaining a temperature measuring device may be submitted electronically within 10 days in lieu of an onsite reinspection.
No County legal action will result from this inspection. Report emailed.
On July 1st, 2023, the Environmental Services Department started emailing permit card(s) and permit invoice(s) to permittees. We need a current and accurate email address on file to ensure you receive a copy of your permit card and invoice(s) upon renewal.
If you are unsure whether your email address is accurate, you may:
• Contact your inspector using the phone number or email on your last inspection report to review, or
• Contact the Department using the email addresses below,
o Envquickservicerestaurants@maricopa.gov (facilities such as fast-food)
o Envfullservicerestaurants@maricopa.gov (facilities that are full-service restaurants)
o Envretailgrocery@maricopa.gov (facilities like grocery stores or retail food markets)
o Envspecialtyprograms@maricopa.gov (mobile food/special events/plan review)
If you need to update your email address and/or other contact information, please submit an administrative change request form at the below website
https://www.maricopa.gov/FormCenter/Environmental-Services-16/Administrative-Change-Request-Form-181.
Review Notes: QA,Review Complete: CHECKED,Award: Not Participating,Signer: Julienna Grise
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.