Inspection Report

Business Name
Dunkin #347680

Business Address
21148 E RITTENHOUSE RD QUEEN CREEK AZ 85142

Permit Number
FD-69283

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
CI Food Routine Inspection

Inspection Date
5/14/2026

Grade
B

Priority Violation
1

Inspection Status
Completed

Violations

Violation #: 2

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: Certified Food Protection Manager not at establishment during the inspection. Maricopa County requires all establishments that serve open food, which requires time/temperature control for food safety, to have at least one certified Food Protection Manager (CFPM) on staff. The Person in Charge shall be a CFPM and is required to be onsite during the hours of operation. This certificate must be visible or readily accessible. Corrective Action: Correct prior to next routine inspection. ===2ND CONSECUTIVE

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

6-301.11 - Priority Foundation: Handwashing Cleanser, Availability. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed no soap at the handwashing sink next to the ice machine. Notified person in charge and they refilled the soap dispenser at time of inspection. Corrective Action: Corrected at time of inspection. Predefined Comment: Handwashing sinks must be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities must be maintained in a condition that promotes handwashing.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cold brew in the tap system at 48*F using probe thermometer (verified by person in charge). Person in charge stated the cold brew was prepared and placed in the unit at 3:30 am, time of inspection was approximately 10:00 am. PIC voluntarily discarded - see embargo form. Corrective Action: Corrected at time of inspection. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below.

Violation #: 43

Description: In-Use Utensils; Properly Stored

Comments:

3-304.12 - Core: In-Use Utensils, Between-Use Storage Addl Notes: Observed ice scoop kept inside ice bin at the front counter with handle in contact with the ice. In-use utensils may not be stored in ice between uses in order to prevent cross contamination. PIC removed the ice scoop at time of inspection. Corrective Action: Corrected at time of inspection. Predefined Comment: In-use utensils must be stored in a clean, dry location; in running water; or in hot water above 135°F. If utensils are stored in food, the handles must be stored above the surface of the food. All in-use utensils were properly stored at time of inspection.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.
Calibrated thermometer. Discussed preparing and cooling of cold brew.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.