Inspection Report

Business Name
State 48 Brewery
Business Address
15600 N HAYDEN RD SCOTTSDALE AZ 85260
Permit Number
FD-70007
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
5/20/2024
Grade
Not Participating
Priority Violation
2
Inspection Status
Completed

Violations

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14, P: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. ...........In walk in cooler, uncovered containers >10 inches deep of buffalo chicken dip and beer cheese with internal temperatures of 46*F-50*F. Per date stickers, dip and cheese were prepared >24 hours. Buffalo chicken dip and beer cheese were discarded. See embargo form. Discussed proper cooling temperatures and cooling methods with employees.

(A) Cooked TIME/TEMPERATURE CONTROL FOR SAFETY FOOD shall be cooled: (1) Within 2 hours from 57ºC (135ºF) to 21ºC (70°F); and (2) Within a total of 6 hours from 57ºC (135ºF) to 5ºC (41°F) or less.

(B) TIME/TEMPERATURE CONTROL FOR SAFETY FOOD shall be cooled within 4 hours to 5oC (41oF) or less if prepared from ingredients at ambient temperature, such as reconstituted FOODS and canned tuna.

(A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3)Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient; or (7) Other effective methods.

(B) When placed in cooling or cold holding EQUIPMENT, FOOD containers in which FOOD is being cooled shall be: (1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and (2) Loosely covered, or uncovered if protected from overhead contamination, as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD.

Correct By: Corrected At Time Of Inspection

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B), P: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding. .............On cook line, in large prep table cooler, TCS foods (cut tomatoes, cooked rice, mashed potatoes, cooked pasta) with internal temperatures of 50*F. Per date stickers, TCS foods were prepared the previous day and were in large prep table cooler overnight. Cut tomatoes, cooked rice, mashed potatoes, cooked pasta were discarded. See embargo form. Ambient temperature of prep table cooler was 50.3*F, taken with inspector min/max irreversible thermometer. Discontinue use of large prep table cooler for storing of TCS foods until able to maintain proper temperature throughout the day.

Maintain TCS (time/ temperature control for food safety) foods at a cold holding temperature of 41*F or less at all times.

Repeat Violations: 2nd,Correct By: Corrected At Time Of Inspection

Comments/Details

This establishment is not participating in the award program at this time and had 2 Priority, 0 Priority Foundation Violations on this inspection.

Core-2-102.12(A), C: Certified Food Protection Manager....The person in charge (PIC) is not a certified food protection manager. Ensure the PIC on site is an ANSI-certified food protection manager and maintain the certificate available for review.
(A) The PERSON IN CHARGE shall be a certified FOOD protection manager who has shown proficiency of required information through passing a test that is part of an ACCREDITED PROGRAM.

A pattern of non-compliance is developing for Priority violation #20, 3-501.16(A)(2) and (B), which has been noted during this inspection. An Active Managerial Control Intervention Visit was discussed with the person in charge. Failure to correct repeat violations may result in legal action.

Reviewed with manager: consumer advisory.

Ensure all employees working with food obtain food worker certification from ANSI certified online site.

Routine inspection report was emailed to person in charge at establishment. Inspection report received by operator.
No County legal action will result from this inspection.

On July 1st, 2023, the Environmental Services Department started emailing permit card(s) and permit invoice(s) to permittees. We need a current and accurate email address on file to ensure you receive a copy of your permit card and invoice(s) upon renewal.
If you are unsure whether your email address is accurate, you may:
• Contact your inspector using the phone number or email on your last inspection report to review, or
• Contact the Department using the email addresses below,
o Envquickservicerestaurants@maricopa.gov (facilities such as fast-food)
o Envfullservicerestaurants@maricopa.gov (facilities that are full-service restaurants)
o Envretailgrocery@maricopa.gov (facilities like grocery stores or retail food markets)
o Envspecialtyprograms@maricopa.gov (mobile food/special events/plan review)
If you need to update your email address and/or other contact information, please submit an administrative change request form at the below website
https://www.maricopa.gov/FormCenter/Environmental-Services-16/Administrative-Change-Request-Form-181.



Embargo Lbs: 74,Award: Not Participating,Signer: Matthew Pickering,Food Manager Licenses: 0

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.