Inspection Report

Business Name
Chung Ming

Business Address
4312 W CACTUS RD GLENDALE AZ 85304

Permit Number
FD-71985

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
8/5/2025

Grade
Not Participating

Priority Violation
2

Inspection Status
Re-inspection required

Violations

Violation #: 15

Description: Food Separated and Protected

Comments:

PRIORITY VIOLATION-3-304.11 - Priority: Food Contact with Equipment and Utensils and Linens. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4621/AMC-Toolbox---Cross-Contamination.

Addl Notes: Observed that employees were thawing raw pork in rinse sink of three compartment sink and not in the food prep sink. Foods must be thawed in food prep sink. Food was removed and placed in walk in cooler. Sink was washed rinsed and sanitized before used for washing dishes. Corrective Action: Corrected at time of inspection.

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

Observed cooked shrimp in flip top portion in small prep cooler at 60*F. As per the person in charge the shrimp was cooked and placed there to cool. Flip lid portion of prep cooler is not to be used for cooling foods. Shrimp was placed in bottom of the cooler.

Observed shrimp in gray tote at 48*F, fried and cooled chicken in walk in cooler in grey tote 48-52*F. Noodles in grey tote in walk in cooler at 47*F.

Cold hold of food to be 41*F or lower. Items were embargoed and discarded.

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: 2nd consecutive violation

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed that walk in cooler has an internal ambient temperature of 50*F. Equipment must be able to hold food at 41*F or lower. Owner contacted refrigeration company for repair, added freon to see if temperature drops. Repair could not be completed at time of inspection. Temperature control for safety foods were embargoed and discarded. Raw meats were placed in freezer on site to hold cold. Corrective Action: Correct at once.

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-202.11 - Priority Foundation: Food-Contact Surfaces-Cleanability. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed crunchy noodles stored in cardboard cream cheese box. Food contact surfaces must be durable and easily cleanable. Noodles were moved to cleanable container. Corrective Action: Corrected at time of inspection.

Violation #: 49

Description: Non-Food-Contact Surfaces Clean

Comments:

4-601.11(B) and (C) - Core: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils Addl Notes: Observed unclean surfaces with old organic matter and oil on equipment such as the two door upright freezer and bottom shelf of prep table across from grill line. Surfaces are to be cleaned at regular intervals to prevent build up of old food and other debris. Corrective Action: Correct prior to next routine inspection.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.