Inspection Report

Business Name
Barro's Pizza

Business Address
41722 N GAVILAN PEAK PKWY PHOENIX AZ 85086

Permit Number
FD-72141

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
8/4/2025

Grade
C

Priority Violation
2

Inspection Status
Re-inspection required

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed handwashing sink by the dishwasher that is not working per PIC. Handwash sinks must be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities must be maintained in a condition that promotes handwashing. PIC stated work order is in for the handwashing sink repair. Corrective Action: Correct prior to re-inspection by 8/14/25.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed bag of lettuce stored above the fill line of the sandwich cold table at 45*F, chickpeas from a can at the salad bar 51*F, cheese at the salad bar 46*F. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. All TCS food items had been out of temperature for less than 4 hours were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

PRIORITY VIOLATION-3-501.18 - Priority: Ready-To-Eat Time/Temperature Control for Safety Food, Disposition. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources.

Addl Notes: Observed chickpeas from a can with no date marking in undercounter fridge by the pizza assembly line. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). PIC and employees could not determine the day it was prepped and was discarded at the time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

3-501.15 (B) - Core: Cooling Methods; Covered and Properly Arranged Containers. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed two containers of cooked chicken in the cooling process 45*F-67*F stacked on top of one another with lids on. TCS foods must be cooled in: uncovered/loosely covered, shallow containers less than 4 inches deep, in equipment designed to rapidly cool, by using an ice bath, by using ice as an ingredient, or another effective means. PIC removed the lids and placed the containers of chicken on top of the cooling rack. Corrective Action: Corrected at time of inspection.

Violation #: 36

Repeat Violation

Description: Thermometers Provided and Accurate

Comments:

4-204.112 (A-D) - Core: Temperature Measuring Devices-Functionality Addl Notes: Observed no thermometer inside the prep fridge or under counter fridge for the pizza cook line. Thermometers must be in refrigeration or freezer units and readily accessible if storing TCS food products within. Consecutive repeat violation: 2nd. Corrective Action: Correct prior to next routine inspection.

Violation #: 55

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-201.13 - Core: Floor and Wall Junctures, Coved, and Enclosed or Sealed Addl Notes: Observed tile around the mop sink pulling away from the base of the outside of the sink. All floors, walls, and ceilings must be maintained and repaired such that it is smooth and easily cleanable. Repair physical facility prior to next routine inspection. Corrective Action: Correct prior to next routine inspection.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.
Discussed with PIC: in-use utensil storage, correct date marking

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.