Inspection Report

Business Name
DC Steakhouse
Business Address
180 S ARIZONA AVE CHANDLER AZ 85225
Permit Number
FD-74970
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
8/25/2025
Grade
Not Participating
Priority Violation
2
Inspection Status
Re-inspection required

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-703.11 - Priority: Hot Water and Chemical-Methods; Sanitizing Food Contact Surfaces. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: Observed high temperature warewashing machine sanitizing with hot water at 139.1 degrees F. When food-contact surfaces are being sanitized with hot water in a dish machine, the surface temperature must reach at least 160°F as measured by an irreversible registering temperature measuring device to destroy pathogens that may remain on such surfaces after cleaning. Person in charge (PIC) will discontinue using warewashing machine for sanitizing until it is repaired and will use the 3 compartment sink for sanitizing. Corrective Action: Corrected at time of inspection.

Violation #: 23

Description: Proper Date Marking and Disposition

Comments:

PRIORITY VIOLATION-3-501.18 - Priority: Ready-To-Eat Time/Temperature Control for Safety Food, Disposition. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4125/Food-SafetyOperator-Resources.

Addl Notes: In the walk in cooler, observed homemade bearnaise sauce with a date mark of 08-17. In the reach in cooler to the right of hot holding, observed small container of cooked apples with date mark 08-07, a medium plastic container of corn sauce with date mark of 08-17, and a small plastic container of bechamel sauce with date mark 08-17. RTE/TCS foods requiring date marking must be date marked within 24 hours and sold or discarded after 7 days (including the day it was made as day 1). All RTE/TCS foods past 7 days of preparation were discarded by PIC at the time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

4-302.13 - Priority Foundation: Temperature Measuring Devices, Manual and Mechanical Warewashing. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: No irreversible temperature measuring device available for high temperature warewashing machine. Sanitizing using high temperature warewashing machines requires an irreversible measuring device to ensure food contact surfaces reach 160°F. Provide approved irreversible measuring device prior to re-inspection. Corrective Action: Correct prior to re-inspection 09/04/2025.

Comments/Details


No County legal action will result from this inspection.
Report emailed.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.