Inspection Report

Business Name
Kona Grill

Business Address
2224 E WILLIAMS FIELD RD GILBERT AZ 85295

Permit Number
FD-76497

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
8/1/2024

Grade
Not Participating

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 21

Description: Proper Hot Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(1) - Priority: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.

Addl Notes: Observed cooked onions with internal temperature of 92 degrees Fahrenheit at the time of inspection. PIC put container on top of the grill to reheat to 165 degrees F. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 135°F or above. Corrective Action: Corrected at time of inspection.

Violation #: 22

Repeat Violation

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed sliced cheese, shredded cheese, hard boiled eggs with internal temperatures between 50 and 56 degrees Fahrenheit at the time of inspection. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. This is to prevent microbial growth. Some TCS items that had been in units longer than 4 hours were discarded. Other TCS items being held on ice baths had ice replaced and were holding at 41 degrees F. 2nd repeat violation.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed all 3 prep table units across from the grills/fryers with ambient air temperatures between 56 and 60 degree Fahrenheit with max/min thermometer. Establishment had been using ice on the north most unit but not the other two. Have units serviced so they can hold food at 41 degrees Fahrenheit or below. Or continuously monitor temperature of the food in the ice bath and replace ice as needed. Corrective Action: Correct prior to re-inspection on Tuesday, August 13, 2024.

Violation #: 38

Description: Insects, Rodents and Animals not Present

Comments:

6-501.111 (C) - Priority Foundation: Controlling Pests; Approved Trapping Methods/Existence Addl Notes: Observed at the mop sink, and near the keg cooler/soda bibs, an excessive amount of drain flies. Discussed using fly tape in approved areas, and ensuring areas are kept clean and dry. Predefined Comment: Establishment must be maintained free of pests and all pest control measures must be conducted by a licensed pest control specialist. Must eliminate current pest control problem and obtain pest control from a certified and licensed pest control specialist by re-inspection on Tuesday, August 13, 2024.

Comments/Details

Predefined Comment: Due to the violations noted on this inspection report, County legal action may result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.