Inspection Report

Business Name
Cook & Craft

Business Address
7306 E SHEA BLVD SCOTTSDALE AZ 85260

Permit Number
FD-77536

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
11/14/2024

Grade
Not Participating

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 16

Repeat Violation

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-602.11 (E) - Core: Equipment Food - Contact Surfaces and Utensils-Frequency; Non-TCS. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed an accumulation of organic matter in the top interior of the ice machine. Discussed with PIC cleaning the ice machine at a frequency to preclude the accumulation of organic matter. Corrective Action: Correct prior to next routine inspection. Repeat Violation: 2nd consecutive violation.

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14 - Priority: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.

Addl Notes: Observed in the walk-in cooler a covered, 4-inch-deep container of cheese sauce on a bottom rack. The cheese sauce measured 101°F as measured with a calibrated probe thermometer. Per PIC, cheese sauce was placed in the walk-in cooler to cool 5-6 hours prior. Cooked TCS foods must be cooled from 135°F to 70°F within 2 hours, and from 70°F to 41°F within 4 hours for a total of 6 hours for cooling. Had PIC discard cheese sauce. Discussed with PIC using proper cooling methods, such as using shallow pans, leaving cooling items uncovered, placing cooling items on the top rack and frequent stirring. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed on the counter next to the cook line a container of oil mixed with garlic and herbs at 67°F. Per PIC, garlic-in-oil mixture had been stored at ambient temperature for two days. Discussed with PIC that garlic-in-oil mixtures are TCS and should be kept at a temperature of 41°F or below to prevent the growth of pathogenic bacteria. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. All TCS foods improperly cold held were discarded by PIC at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 35

Description: Approved Thawing Methods Used

Comments:

3-501.13 - Core: Thawing Addl Notes: Observed in the reach-in cooler packages of perch being thawed in its original packaging, which states to remove fish from packaging before thawing. All ROP fish labeled "Keep Frozen" must be removed completely from reduced oxygen packaging (ROP) prior to thawing under refrigeration or immediately after thawing under cold running water. All ROP fish was removed from ROP packaging at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.