Inspection Report

Business Name
2 Brothers Pizza & Wings

Business Address
12835 N Cave Creek RD Phoenix AZ 85022-5834

Permit Number
FD-80289

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/13/2026

Grade
Not Participating

Priority Violation
1

Inspection Status
Re-inspection required

Violations

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Oil and garlic stored on food prep table at 60 degrees F. Item was placed in ice water to cool rapidly to 41 degrees F. 10 Bags of shredded cheese, 1 bag of precooked sausage stored at 60 degrees F in reach in cooler. PIC stated items were delivered this morning and stored on the floor less than 2-3 hours ago and PIC stored them in fridge less than 2 hours ago. PIC was instructed to store the items in reach in cooler for rapid cooling. Items were stored in freezer and reached proper temperature.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

7-101.11 - Priority Foundation: Identifying Information, Prominence-Original Containers Addl Notes: Spray bottle of degreaser stored on chemical rack is not provided by chemical identifying label. PIC removed the item and labeled it. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Tall reach in cooler in food prep line has an ambient temperature of 48 degrees F. Predefined Comment: Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Since there is only one small reach in cooler by cook line repair ASAP. Corrective Action: Correct prior to re-inspection.

Violation #: 36

Description: Thermometers Provided and Accurate

Comments:

4-502.11(B) - Priority Foundation: Good Repair and Calibration Addl Notes: Thermometer hanging on the shelf of reach in cooler indicates an ambient temperature of 30 degrees in reach in cooler. The ambient temperature of the cooler is 48 degrees F with two other min/max thermometer. Replace the thermometer with the one that is in good repair and calibrated. Corrective Action: Correct prior to re-inspection.

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

Violation #: 49

Description: Non-Food-Contact Surfaces Clean

Comments:

4-601.11(B) and (C) - Core: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils Addl Notes: Container of dough maker in storage is accumulated with dried dough and build up. PIC state dough was prepared the day before. Predefined Comment: Nonfood-contact surfaces shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Nonfood-contact surfaces shall be cleaned at a frequency necessary to preclude accumulation of soil residues. PIC removed the container took it to three compartments sink to be washed rinsed and sanitized. Corrective Action: Corrected at time of inspection.

Comments/Details

Predefined Comment: No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.