Inspection Report

Business Name
Village Inn
Business Address
2780 E GERMANN RD CHANDLER AZ 85286
Permit Number
FD-80294
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
CI Food Routine Inspection
Inspection Date
5/19/2026
Grade
Not Participating
Priority Violation
1
Inspection Status
Re-inspection required

Violations

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-501.11 - Core: Good Repair and Proper Adjustment-Equipment Addl Notes: ***3rd Repeat Violation*** There is excess ice buildup along the walk in freezer door. PIC has a work order in for the heat strip. All equipment must be maintained in good repair at all times. Corrective Action: Correct prior to next routine inspection.

Violation #: 51

Description: Plumbing Installed; Proper Backflow Devices

Comments:

PRIORITY VIOLATION-5-202.13 - Priority: Backflow Prevention, Air Gap

Addl Notes: Chemical dispenser near the mop sink does not have the required ASSE 1055A air gap. Flex gaps are not approved. Provide an internal air gap for the chemical dispenser prior to reinspection on 5/22/26. Corrective Action: Correct prior to re-inspection.

Violation #: 55

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-201.11 - Core: Floors, Walls and Ceilings-Cleanability Addl Notes: ***2nd Repeat Violation*** The floor tiles and grout in the ware wash area is excessively damaged/chipped with standing water present. The wall tile around the mop sink has been removed and the wall is no longer easily cleanable due to the leftover adhesive. Ensure that floor and wall are repaired properly to a smooth and easily cleanable surface. Per PIC these items will be repaired over the summer.

Comments/Details


No County legal action will result from this inspection.
Provided time as a control document to PIC. Report emailed.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.