Inspection Report
Jimmy John's
2960 S ALMA SCHOOL RD CHANDLER AZ 85286
FD-81094
Food Establishment - Eating & Drinking
Food Routine Inspection
3/19/2026
Not Participating
1
Completed
Violations
Violation #: 16
Description: Food-Contact Surfaces: Cleaned and Sanitized
Comments:
4-602.11 (E) - Core: Equipment Food - Contact Surfaces and Utensils-Frequency; Non-TCS. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed speckled back organic growth on the underside of the ice machine production area. All food-contact surfaces must be cleaned to sight and touch. Clean ice machine prior to the next routine inspection. Corrective Action: Correct prior to next routine inspection.
PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.
Addl Notes: Observed 0ppm quat sanitizer in the 3 comp sink where dishes were actively being washed. Observed the chemical supply bucket to be empty. Discussed the importance of proper sanitizer levels and proper monitoring of sanitizer levels. PIC refilled sink with quat tablets since the liquid concentrate was out and remeasured at 200ppm. Food-contact surfaces were properly sanitized at time of inspection. Corrective Action: Corrected at time of inspection.
4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed food debris on the onion dicer stored as cleaned on the warewashing rack. All food-contact surfaces must be cleaned to sight and touch. PIC relocated all food-contact surfaces to warewashing area to be washed, rinsed, and sanitized at the time of inspection. Corrective Action: Corrected at time of inspection.
Violation #: 33
Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control
Comments:
3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed multiple tightly wrapped cooling TCS foods in both prep coolers with internal temperatures ranging from 48-59*F including shredded lettuce, tomatoes, and TCS deli meats. Observed 10"+ of cooling lettuce packed into a tightly wrapped container. Observed approximately 4 inches of cooling meats separated by layers of parchment paper and tightly wrapped multiple time. Observed all foods cooling in the prep coolers that are intended only to hold already cooled TCS foods and are not intended to cool TCS foods. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. TCS foods must be cooled in: uncovered/loosely covered, shallow containers less than 4 inches deep, in equipment designed to rapidly cool, by using an ice bath, by using ice as an ingredient, or another effective means. All TCS foods being cooled in deep containers were transferred to shallow containers to allow for rapid cooling. Corrective Action: Corrected at time of inspection.
Comments/Details
No County legal action will result from this inspection.
Observed a leak from the mop sink AVB (Atmospheric Vacuum Breaker). Provide backflow certificates prior to the next routine inspection or have the AVB repaired/replaced to normal functionality.
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.