Inspection Report

Business Name
Bird Talk Chicken

Business Address
960 W UNIVERSITY DR TEMPE AZ 85281

Permit Number
FD-82974

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
8/6/2024

Grade
Not Participating

Priority Violation
1

Inspection Status
Re-inspection required

Violations

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cole slaw, cut tomatoes, and cut lettuce in the prep table with temperatures between 54 to 58*F at time of inspection. Per person in charge (PIC), all items were placed in the prep table less than 3 hours prior to inspection. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed prep table with an ambient temperature of 52.8*F holding TCS food items with temperatures between 54 to 58*F (see # 22) at time of inspection. Discussed proper cold holding temperatures with PIC at time of inspection. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Correct prior to re-inspection on 8/15/2024.

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed cooked noodles with a lid on the container and with a temperature of 102 to 105*F in a container sitting out on a prep table at ambient temperature at time of inspection. Per person in charge (PIC) item was cooked within an hour of inspection and cooling. PIC moved item to walk-in to rapid cool at time of inspection. Observed cooked chicken wings with a temperature of 119 to 123*F sitting out on a prep table at ambient temperature at time of inspection. Per PIC, cooked wings were made within an hour of inspection and left out to cool. PIC moved wings to walk-in to rapid cool at time of inspection. Discussed with PIC about proper cooling methods and cooling procedures. TCS foods must be cooled in: uncovered/loosely covered, shallow containers less than 4 inches deep, in equipment designed to rapidly cool, by using an ice bath, by using ice as an ingredient, or another effective means. Provided PIC with cooling guidance documents at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Of Note:
- Reviewed proper handwashing procedures with person in charge (PIC) at time of inspection. Provided PIC with handwashing guidance document at time of inspection.

- Observed leak from Atmospheric vacuum breaker (AVB) at the mop sink. Prior to next routine inspection, have backflow device serviced by a plumber or backflow specialist to ensure backflow device is in good repair.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.