Inspection Report

Business Name
The Buffalo Spot Goodyear
Business Address
14130 W INDIAN SCHOOL RD GOODYEAR AZ 85395
Permit Number
FD-83649
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
2/12/2025
Grade
A
Priority Violation
0
Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-602.11 (E) - Core: Equipment Food - Contact Surfaces and Utensils-Frequency; Non-TCS. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Soda fountain nozzles found with build-up of residues. Predefined Comment: All food-contact surfaces must be cleaned to sight and touch. Properly clean soda non-TCS food contact surfaces at least once every 24-hours or when contaminated. PIC had food employee remove soda nozzles for cleaning at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 55

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-501.12 - Core: Cleaning, Frequency and Restrictions Addl Notes: Floor drain servicing drink station has build-up residues. Predefined Comment: Physical facility must be cleaned frequently enough to prevent accumulation of dirt, organic matter, and food debris. Clean physical facility prior to next routine inspection. Corrective Action: Correct prior to next routine inspection.

Comments/Details


Predefined Comment: No County legal action will result from this inspection.
Reviewed facility's procedures and protocols for:
--Plumbing Installed; Proper Backflow Devices (i.e. - hose attachment at mop sink);
--Food-Contact Surfaces: Cleaned and Sanitized (i.e. - chemical sanitizing concentration solution at three compartment sink)

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.