Inspection Report

Business Name
China Jade Tempe
Business Address
825 W BASELINE RD TEMPE AZ 85283
Permit Number
FD-83803
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
7/11/2024
Grade
Not Participating
Priority Violation
3
Inspection Status
Re-inspection required

Violations

Violation #: 15

Description: Food Separated and Protected

Comments:

PRIORITY VIOLATION-3-302.11 (A1-2) - Priority: Packaged and Unpackaged Food-Separation, Packaging, and Segregation; Protection from Cross Contamination. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4621/AMC-Toolbox---Cross-Contamination.

Addl Notes: Observed raw chicken bins stored over raw eggs. Instructed person in charge (PIC) to flip order at time of inspection. Raw chicken must be stored on the bottom. Corrective Action: Corrected at time of inspection.

Violation #: 21

Description: Proper Hot Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(1) - Priority: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.

Addl Notes: Observed egg drop and mixed vegetable soup hot holding at 125*f degrees. Unit was found to be on too low of a setting. PIC reheated items back to 165*f degrees and held above 135*f degrees. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: At time of inspection inspector observed walk-in to have a hold temperature of 45*f degrees. Per PIC, most of the walk-in product had been restocked that day and large amount of preparation had occurred causing the walk-in to be opened multiple times within the last 2 hours. Raw beef was identified as an item that had been inside walk-in longer than a day. Beef temped at 45*f degrees. Other TCS items found out of temperature were raw chicken, cooked chicken, gyoza, and cut cabbage between 62*f-48*f degrees. Walk-in found to reach 41*f degrees at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed both cookline reach-ins holding TCS foods. left side cookline reach in holding 59*f degrees and right side holding 54*f degrees. re-inspection scheduled for 7/18/24 Corrective Action: Correct prior to re-inspection.

3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed cooked chicken, red pork, cooked shrimp, cut cabbage, lomein, cooked beef all in the process of cooling from cooking in the last 2 hours from 69*f- 46*f degrees in both open top cookline units. Items were sent to the walk-in freezer to rapidly cool and placed in functional double door reach-in. Corrective Action: Corrected at time of inspection.

Comments/Details

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.