Inspection Report

Business Name
Food City
Business Address
1940 W INDIAN SCHOOL RD PHOENIX AZ 85015
Permit Number
FD-85113
Permit Type
Food Establishment - Meat Market
Inspection Purpose
Food Routine Inspection
Inspection Date
5/14/2026
Grade
B
Priority Violation
0
Inspection Status
Completed
Cutting Edge Cutting Edge Participant

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

6-301.12 - Priority Foundation: Hand Drying Provision. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed no hand drying provision at handwash sink next to 3-compartment sink. Handwash sinks shall be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities shall be maintained in a condition that promotes handwashing. Person in charge (PIC) provided hand drying provision for handwash sink at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed raw beef debris along blade/inner compartments of meat saw in butcher room. Per PIC, meat saw was last used day prior to inspection. All food-contact surfaces shall be cleaned to sight and touch. All food-contact surfaces that contact TCS foods shall be cleaned every 4 hours by washing, rinsing, and sanitizing. PIC instructed food employee to wash/rinse/sanitize blade and inner compartments of meat saw at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 36

Description: Thermometers Provided and Accurate

Comments:

4-302.12 - Priority Foundation: Food Temperature Measuring Devices Addl Notes: Observed no food probe thermometer. PIC not able to provide food probe thermometer at start of inspection. Properly calibrated probe thermometers are required at all times for monitoring food temperatures. Establishment provided a probe thermometer for meat market prior to end of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details


No County legal action will result from this inspection.
Discussed use of non-potable ice with open food at seafood section of meat market. Establishment to discontinue storage of open food on ice made out of non-potable water or store open food in food-safe container on top of ice.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.