Inspection Report

Business Name
Bashas'

Business Address
10111 E BELL RD SCOTTSDALE AZ 85260

Permit Number
FD-85117

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
10/14/2024

Grade
Not Participating

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 8

Description: Hands Clean and Properly Washed

Comments:

PRIORITY VIOLATION-2-301.14 - Priority: When to Wash. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing.

Addl Notes: Employee wiping down slicers, moved trash can with hands and cloth, then continued using cloth and hands cleaning the slicers, without a proper handwash and changing of dirty cloth. Instructed employee to properly wash hands at handwash sink and change dirty cloth. Discussed the importance of proper hand washing and when hand washing is required with the person-in-charge (PIC). Hands are to be washed at any time contamination occurs and when changing tasks. Corrective Action: Corrected at time of inspection.

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: At slicer counter, fourth slicer with accumulation of cheese residues on blade and nonfood contact surfaces. Per manager, slicer was not used today and stored as clean. Manager instructed employee to re-wash, rinse, and sanitize slicer. Discussed more frequent monitoring when warewashing equipment before storing as clean. All food-contact surfaces must be cleaned to sight and touch. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: In 3-door reach in cooler near hot holding case, packaged shredded cheese and packaged bacon with internal temperatures of 49*F-55*F. Per manager, cheese and bacon were in cooler >24 hours. Packaged shredded cheese and packaged bacon were discarded. See embargo form. Ambient temperature of reach in cooler was 51.9*F, taken with inspector min/max irreversible thermometer. Discontinue storing of TCS foods in reach in cooler until able to maintain proper temperature at all times of day. Manager submitted work order for repair of cooler. Maintain TCS (time/ temperature control for food safety) foods at a cold holding temperature of 41*F or less at all times. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
This establishment is enrolled in the Maricopa County Environmental Services Cutting Edge Program and is on the Cutting Edge of food safety.

After discussion with the person in charge, it has been determined that the root causes of the violations was training staff (verification breakdown), which resulted in the violations.
Ensure all employees working with food obtain food worker certification from ANSI certified online site.

Routine inspection report was emailed to person in charge at establishment.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.