Inspection Report

Business Name
Ono Hawaiian BBQ
Business Address
15560 N FRANK LLOYD WRIGHT BLVD SCOTTSDALE AZ 85260
Permit Number
FD-85612
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
5/19/2025
Grade
Not Participating
Priority Violation
3
Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: At in use 3-compartment sink, no detectable chlorine sanitizer at dishware surfaces. Employee emptied third basin of sink, and refilled with clean water and added chlorine to the proper concentration of 50-100ppm. Discussed more frequent monitoring of sanitizer solution, especially at start of day and after heavy periods of warewashing. Corrective Action: Corrected at time of inspection.

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14 - Priority: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.

Addl Notes: In walk in cooler, covered container of cooked macaroni with internal temperatures of 47*F-49*F. Per date sticker, macaroni was prepared the previous day. Container of cooked macaroni was discarded. See embargo form. Discussed proper cooling temperatures and methods with manager and employees. Cooked TCS foods must be cooled from 135°F to 70°F within 2 hours, and from 70°F to 41°F within 4 hours for a total of 6 hours for cooling. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: On cook line, in cold holding well, macaroni salad with an internal temperature of 50*F. Per manager, macaroni salad was removed from cold holding <30 minutes. Employee added ice to cold holding well to rapidly cool macaroni salad back down to the proper cold holding temperature. Maintain TCS (time/ temperature control for food safety) foods at a cold holding temperature of 41*F or less at all times. Corrective Action: Corrected at time of inspection.

Violation #: 49

Repeat Violation

Description: Non-Food-Contact Surfaces Clean

Comments:

4-602.13 - Core: Nonfood Contact Surfaces Addl Notes: Second Consecutive Violation. Throughout kitchen, doors and handles of cold holding units, inside of cold holding units, shelving in walk in cooler with accumulation of food debris. Maintain clean. Nonfood-contact surfaces shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Nonfood-contact surfaces shall be cleaned at a frequency necessary to preclude accumulation of soil residues. Corrective Action: Correct prior to next routine inspection.

Comments/Details


No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.