Inspection Report

Business Name
Harmony Kitchen

Business Address
1320 E BROADWAY RD TEMPE AZ 85282

Permit Number
FD-86046

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
9/16/2024

Grade
Not Participating

Priority Violation
0

Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

4-601.11(A) - Priority Foundation: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed knife with food debris on it. Observed can opener with thick layer of black, sticky material. Person in charge indicated both were clean. Discussed ensuring all food contact surfaces are clean to the site and touch. The knife was put in the dish area to be rewashed, rinsed, and sanitized. Person in charge indicated the thick black sticky material is a lubricant for the can opener; discuss applying less of the lubricant and washing the can opener and reapplying a thin amount each time. Corrective Action: Corrected at time of inspection.

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

4-501.14 - Core: Warewashing Equipment, Cleaning Frequency Addl Notes: Observed a buildup of grime in the 3-compartment sink and a buildup of hard water deposits in the warewashing machine. Warewashing facilities must be cleaned frequently enough to prevent accumulation of dirt, organic matter, hard water deposits, and food debris. Must clean warewashing facilities prior to next routine inspection. Corrective Action: Correct prior to next routine inspection.

Violation #: 49

Repeat Violation

Description: Non-Food-Contact Surfaces Clean

Comments:

4-602.13 - Core: Nonfood Contact Surfaces Addl Notes: Observed a buildup of grime, food debris, and grease on the outside of food containers, on prep tables, on stoves/grills, on the outside of refrigeration units (refrigerated prep tables, outside and inside of walk-in refrigerators and freezer). Non-food contact surfaces of equipment must be cleaned at a frequency that precludes the buildup of grime, food debris, and trash. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner. Establishment must deep clean all non-food contact surfaces of equipment by next routine inspection. Corrective Action: Correct prior to next routine inspection. REPEAT VIOLATION (2ND CONSECUTIVE VIOLATION).

Violation #: 55

Repeat Violation

Description: Physical Facilities Installed, Maintained, and Clean

Comments:

6-501.12 - Core: Cleaning, Frequency and Restrictions Addl Notes: Observed food splatter on walls throughout the establishment. The floors were also sticky and there is a large buildup of food debris under the cookline and under equipment. Physical facility must be cleaned frequently enough to prevent accumulation of dirt, organic matter, and food debris. Must clean physical facility prior to next routine inspection. Corrective Action: Correct prior to next routine inspection. REPEAT VIOLATION (2ND CONSECUTIVE)

Comments/Details

No County legal action will result from this inspection.
如果您對此檢查報告有任何疑問，或者想用中文審閱此檢查報告，請聯繫我們的語言聯絡官： (602) 527-1365. If you have any questions regarding this inspection report, or would like to review it with someone in Chinese, please contact our language liaison at (602) 527-1365.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.