Inspection Report

Business Name
Tocaya Modern Mexican
Business Address
4712 N GOLDWATER BLVD SCOTTSDALE AZ 85251
Permit Number
FD-87793
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
6/26/2026
Grade
Not Participating
Priority Violation
3
Inspection Status
Completed

Violations

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14 - Priority: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.

Addl Notes: Observed a covered pan of cooked black beans in the walk in refrigerator with an internal temperature between 48-50°F. Observed condensation buildup on the interior of the lid. According to the PIC the beans were cooked yesterday and had been cooling since. In the large two door reach in refrigerator near the kitchen entrance observed a 22 quart Cambro filled over 12 inches deep of red salsa with an internal temperature between 50-51°F. Observed condensation buildup on the interior of the lid. According to the date mark and person in charge the salsa was made yesterday. Predefined Comment: Cooked TCS foods must be cooled from 135°F to 70°F within 2 hours, and from 70°F to 41°F within 4 hours for a total of 6 hours for cooling. Predefined Comment: All TCS foods improperly cooled were discarded by PIC at time of inspection. Discussed cooling methods and provided guidance documents electronically. Corrective Action: Corrected at time of inspection.

Violation #: 21

Description: Proper Hot Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(1) - Priority: Time/Temperature Control for Safety Food, Hot Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4614/AMC-Toolbox---Hot-Holding.

Addl Notes: In the holding oven near the reach in refrigerators observed cooked steak/116°F. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 135°F or above. According to the PIC the steak was cooked earlier this morning prior to being placed in the holding oven. Predefined Comment: All TCS foods improperly hot held were reheated to 165°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cooked beans in the open top refrigerator and cooler drawers under the steam table with internal temperatures between 59-60°F. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. After discussion with the person in charge it was determined the beans were at 41°F or below before being rinsed off and placed in refrigeration on the cook line. Ensure all foods are 41°F before being placed in open top refrigerator or cooler drawers as they are not designed to cool product. The beans were moved to the walk in refrigerator at time of inspection. Corrective Action: Corrected at time of inspection.

Comments/Details


Predefined Comment: No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.