Inspection Report

Business Name
Quiessence Restaurant

Business Address
6215 S 30TH ST PHOENIX AZ 85042

Permit Number
FD-88295

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
9/1/2026

Grade
Not Participating

Priority Violation
2

Inspection Status
Re-inspection required

Violations

Violation #: 15

Description: Food Separated and Protected

Comments:

PRIORITY VIOLATION-3-302.11 (A1-2) - Priority: Packaged and Unpackaged Food-Separation, Packaging, and Segregation; Protection from Cross Contamination. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4621/AMC-Toolbox---Cross-Contamination.

Addl Notes: Observe a full size sheet tray of raw salmon filets stored above ready-to-eat carrots and celery on a speed rack in the walk-in cooler. Also observed raw shell eggs stored above bottled beverages. All raw animal proteins must be stored below ready-to-eat (RTE) foods and stored according to cooking temperature at all times to prevent cross contamination. PIC properly stored all raw animal proteins according to the final cooking temperature based on the cooking parameters in § 3-401.11 of the Food Code. Visible existing contamination of the ready-to-eat foods was not noted during the inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed time-and-temperature control for safety (TCS) foods such as milk and raw intact beef primal cuts (rib primal) with internal temperatures of 48-49 degrees Fahrenheit in a walk-in cooler that was not holding cold during the inspection. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Items delivered or prepped on the day of the inspection were moved to alternate walk-in coolers on the premises. Per PIC, items were received less than 4 hours prior to the inspection. Some items prepped prior to the day of the inspection were measured at 42-43F and moved to alternate refrigeration. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Ambient temperature of a walk-in cooler with out-of-temperature TCS foods inside was measured at 55F with min-max thermometer. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Correct prior to re-inspection. Re-inspection is tentatively scheduled for 9/3/2026, as establishment does not operate on Wednesdays.

Comments/Details

No County legal action will result from this inspection.
Inspection report e-mailed. Re-inspection is tentatively scheduled for 9/3/2026. PIC contacted technician during inspection. Provided low-temp dish machine sanitizer log on operator request.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.