Inspection Report

Business Name
Tempe Eats

Business Address
85 E SOUTHERN AVE TEMPE AZ 85282

Permit Number
FD-88484

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
10/23/2024

Grade
C

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: Observed the mechanical ware washing machine in the main kitchen with a chlorine sanitizer concentration of less than 25ppm. PIC informed that the company that services their machines came earlier and stated it was working. Upon, further inspection the plug for the sanitizer was out of the bottle, causing air bubbles in the line. PIC replaced the plug securely, primed the machine, and ran a new load. Chlorine concentration level was 50-100ppm. Instructed PIC to run the loads of dishes that were previously washed to ensure they are properly sanitized. PIC instructed employee to re-sanitize the dishes. Food-contact surfaces must be properly sanitized after washing and rinsing. Discussed the importance of proper sanitizer levels and proper monitoring of sanitizer levels. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed ripped romaine lettuce in the countertop cold holding unit with a temperature of 60*F. The unit has an ambient air temperature of 61.4*F, measured using min/max thermometer. PIC stated that it had been put in the unit about two hours prior. Instructed PIC to place the lettuce in a walk-in to rapidly cool down to 41*F, before being placed back in a holding unit. PIC moved the lettuce to the walk-in refrigerator. PIC agreed to discontinue use of the countertop unit for TCS foods until the unit can hold TCS foods at 41*F or below. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 35

Description: Approved Thawing Methods Used

Comments:

3-501.13 - Core: Thawing Addl Notes: Observed a tuna filet thawed in the walk-in inside the original RO packaging. Informed PIC that fish cannot be thawed in ROP and must be taken out prior to thawing. PIC removed the tuna from ROP at time of inspection. All ROP fish labeled "Keep Frozen" must be removed completely from reduced oxygen packaging (ROP) prior to thawing under refrigeration or immediately after thawing under cold running water. All ROP fish was removed from ROP packaging at time of inspection. Corrective Action: Corrected at time of inspection. ***** 2nd Repeat Violation *****

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.