Inspection Report

Business Name
St. Amand Kitchen & Cocktails

Business Address
3990 S ALMA SCHOOL RD CHANDLER AZ 85248

Permit Number
FD-88653

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/22/2025

Grade
Not Participating

Priority Violation
2

Inspection Status
Completed

Violations

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cut tomatoes, cut lettuce, sliced cheese, guacamole (with tomatoes), cooked onions, salsa, and cooked chicken wings with an internal temperature of 55F-60F. Also observed whipped butter with an internal temperature of 70F. Per PIC, all the food items expect for the chicken wings were prepared today. The chicken wings and butter were discarded at time of inspection; the other food items were moved to the walk-in for rapid cooling. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

7-202.11 - Priority Foundation: Restriction-Presence and Use Addl Notes: Observed a can of flying insect pesticide stored in the mop closet. All pest control for the establishment must be performed by a certified pest control specialist and chemicals for pest control must not be stored onsite. PIC removed pest control chemicals from premises at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed prep table, across from the grill, with a minimum ambient air temperature 61.7F, maintaining TCS foods above 41F at time of inspection. PIC adjusted temperature control on the unit, after waiting for 30 minutes, there was no change in temperature for the unit. Instructed PIC to not store any TCS foods in the unit until the unit is repaired and holding at 41F or below. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. Corrective Action: Corrected at time of inspection.

Violation #: 39

Description: Contamination Prevented during Food Preparation, Storage and Display

Comments:

PRIORITY VIOLATION-3-303.11 - Priority: Ice Used as Exterior Coolant, Prohibited as Ingredient. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4621/AMC-Toolbox---Cross-Contamination.

Addl Notes: Observed a bottle of wine stored in the bar well with ice. Per the bartender, the ice that the wine bottle is stored in was being to for customer drinks as well. The bartender burned all the ice in the well at time of inspection. Ice used as an exterior coolant may not be used as an ingredient in any food/drinks. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.