Inspection Report

Business Name
Snowfox

Business Address
2250 E BASELINE RD PHOENIX AZ 85042

Permit Number
FD-91027

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
9/10/2025

Grade
B

Priority Violation
1

Inspection Status
Re-inspection required

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed mobile cart being stored directly in front of and blocking the designated hand sink in the food prep area. Discussed the importance of maintaining the designated hand sink free from obstructions to promote hand washing. Handwash sinks must be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities must be maintained in a condition that promotes handwashing. PIC relocated all items blocking handwash sink at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: Observed 3-comp sink actively being used to wash dishes with a concentration of 500+ PPM quaternary ammonium sanitizer. Discussed the importance of proper sanitizer levels and proper monitoring of sanitizer levels. PIC remade the solution of sanitizer at the proper concentration at time of inspection. Food-contact surfaces were properly sanitized at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 29

Description: Compliance with Variance, Specialized Process, Reduced Oxygen Packaging Criteria or HACCP plan

Comments:

8-103.12 (B) - Priority Foundation: Conformance with Approved Procedures; HACCP records. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/3978/Food-Variances. Addl Notes: Observed no cleaning log being kept for sushi rice sheeter machine at time of inspection. PIC stated that they only clean the sushi rice sheeter machine once per day around 5pm. HACCP plan on file specifically states cleaning for the rice sheeter machine needs to occur once every 4 hours, and a 'cleaning variance' would be need to be acquired prior to removing this requirement. Discussed the importance of maintaining all records and documentation associated with HACCP plan on-site and available for review. All procedures in approved variance/HACCP plan must be conformed to at all times. Documentation for critical control points in approved variance/HACCP must be completed, available for review, and retained as required by approved variance/HACCP plan. A reinspection will occur on or prior to 9/19/2025. Corrective Action: Correct prior to re-inspection.

Comments/Details

No County legal action will result from this inspection.
Of Note: Discussed maintaining all records and documents needed for HACCP plan on-site and available for review. A reinspection will occur on or prior to 9/19/2025 to verify the correction of Violation #29.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.