Inspection Report

Business Name
McDonald's #37926

Business Address
3155 E Indian School RD Phoenix AZ 85016

Permit Number
FD2404799

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
CI Food Routine Inspection

Inspection Date
7/1/2026

Grade
Not Participating

Priority Violation
0

Inspection Status
Re-inspection required

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-202.12 (A) - Priority Foundation: Handwashing Sinks, Installation. Proper temperature, Mixing Faucet. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed the faucet at the handwashing sink in the beverage area to be not operating. According to PIC, the sensor on the faucet may be faulty. The faucet is not providing warm water for handwashing. The closest handwashing sink to the beverage area is around a couple of corners, around 25 feet or less, and not in eyesight of the beverage station that has open foods to prepare customer's beverages. A handwritten out of order sign had been placed on the handwashing sink. PIC contacted maintenance during the inspection. Handwashing facilities are critical to food protection and must be maintained in operating order at all times so they will be used. A HANDWASHING SINK shall be equipped to provide water at a temperature of at least 38oC (100oF) through a mixing valve or combination faucet. Corrective Action: Correct prior to re-inspection.

Comments/Details

Re-inspection within 10 days for the handwashing sink faucet. A picture of the working faucet can be provided to inspector by email.
No County legal action will result from this inspection.
Discussed the cooling procedure for the breakfast burritos.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.