Inspection Report

Business Name
Taco Guild

Business Address
546 E OSBORN RD PHOENIX AZ 85012

Permit Number
FD2404834

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
7/28/2026

Grade
Not Participating

Priority Violation
1

Inspection Status
Re-inspection required

Violations

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed trash can block handwash sink at cookline. Observed no soap or paper towels at bar handwash sink. Handwash sinks shall be supplied with hot water of at least 100°F, soap and an approved hand drying provision at all times. Facilities shall be maintained in a condition that promotes handwashing. Person in charge (PIC) relocated trash can blocking handwash sink at time of inspection. PIC provided soap and paper towels for bar handwash sink at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed container of shredded cheese with 54°F internal temperature, per probe thermometer, inside top compartment of prep cooler on cookline. Per PIC, containers are to be stored in ice inside of top compartment of prep cooler at cookline. Foods in lower compartment of prep cooler observed with internal temperatures at and below 41°F. Except during preparation, cooking, cooling or when time is used as a control all TCS foods shall be maintained at 41°F or below. Container of shredded cheese was place on ice at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 36

Description: Thermometers Provided and Accurate

Comments:

4-302.12 - Priority Foundation: Food Temperature Measuring Devices Addl Notes: Observed no food probe thermometer. PIC not able to provide food probe thermometer during time of inspection. Properly calibrated probe thermometers are required at all times for monitoring food temperatures. Establishment shall provide a probe thermometer for establishment prior to re-inspection on 8/7/26. Corrective Action: Correct prior to re-inspection.

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

4-302.14 - Priority Foundation: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: Observed no test strips for chlorine dishmachines and 3-compartment sink. PIC not able to provide test strips at time of inspection. Test strips are required for any sanitizers used with food contact surfaces. Establishment shall provide accurate sanitizer test strips prior to re-inspection on 8/7/26. Corrective Action: Correct prior to re-inspection.

Comments/Details

No County legal action will result from this inspection.
Establishment to provide thermometer and test strips prior to re-inspection on 8/7/26. Discussed utensil storage and easily cleanable surfaces.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.