Inspection Report

Business Name
Yellowtail Sushi Sake

Business Address
20250 N 59TH AVE GLENDALE AZ 85308

Permit Number
FD2405028

Permit Type
Food Establishment - Eating & Drinking

Inspection Purpose
Food Routine Inspection

Inspection Date
6/3/2025

Grade
Not Participating

Priority Violation
1

Inspection Status
Completed

Violations

Violation #: 2

Description: Certified Food Protection Manager

Comments:

2-102.12(A) - Core: Certified Food Protection Manager. For a permanent fix to this violation, check out these resources on our website. https://www.maricopa.gov/5114/Food-Restaurants Addl Notes: No certified Food Manager was present at the time of inspection. In Compliance with the Food Code, Maricopa County requires a Food Manager present during operating hours. Emailed Maricopa Policy changes and additional resources on where to acquire a Food Manager Certification. Corrective Action: Correct prior to next routine inspection.

Violation #: 10

Description: Adequate Handwashing Sinks, Properly Supplied and Accessible

Comments:

5-205.11 - Priority Foundation: Using a Handwashing Sink-Operation and Maintenance. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4573/AMC-Toolbox: Handwashing. Addl Notes: Observed the handwashing sink at the sushi bar with cooked rice blocking access to the basin. Alerted manager who moved the sushi rice at time of inspection. Discussed maintaining soap, hot water, paper towels, and a trash basin near ALL the handwashing sinks. Handwashing sinks to be ALWAYS maintained unobstructed and accessible. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed cooked clove garlic in oil (72°F), an opened jar of crunchy garlic in spicy oil (73°F), and cooked tempura shrimp (81°F) sitting out at room temperature. The manager stated the shrimp had been cooked less than 30 minutes prior to temperature measurements, and the jar and the garlic and oil mixture had been made at their opening this morning (less than 4 hours prior to temperature measurement). All TCS foods were moved into the cold holding units at time of inspection. Reviewed time-temperature control foods and discussed the importance of keeping high-risk foods cold. Corrective Action: Corrected at time of inspection.

Violation #: 48

Description: Warewashing Facilities, Installed, Maintained, Used, Test Strips

Comments:

4-302.14 - Priority Foundation: Sanitizing Solutions, Testing Devices. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces. Addl Notes: No Quat test strips were available on site at time of inspection. The operation used quat at the three-compartment sink. The manager ordered quat test strips while EHS was onsite. Establishment to only use the main dishwasher until they have their test strips and can verify that the automatic quat dispenser is set to dispense the correct concentration of quat, daily. Discussed the importance of routine checks. Corrective Action: Corrected at time of inspection.

Comments/Details

No County legal action will result from this inspection.
Discussed regulations and practices of the utensils between use.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation: Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation: Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation: Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program: All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.

Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category	Grade A	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade B	Grade C	Grade C	Grade C	Grade C	Grade C	Grade C	Grade D	Grade D
Priority	0	0	0	0	0	1	1	1	0	1	1	2	2	2	more than 2	more than 3
Priority Foundation	0	1	2	3	4	0	1	2	5	3	4	0	1	2	more than 3	more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.