Inspection Report
Sabor Latino Catering
710 W Elliot RD Tempe AZ 85284
FD2405056
Food Establishment - Food Catering
Food Routine Inspection
7/22/2025
Not Participating
0
Completed
Violations
Violation #: 33
Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control
Comments:
3-501.15 (A) - Priority Foundation: Cooling Methods. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed three containers of green chile salsa filled more than 4 inches deep in the walk-in. The center temperatures were measured with a probing thermometer at a range of 85*F top 73*F in the center. Per person in charge (PIC) the green chile salsa was place in the unit an hour prior to inspection. Discussed with PIC TCS foods must be cooled in: uncovered/loosely covered, shallow containers less than 4 inches deep, in equipment designed to rapidly cool, by using an ice bath, by using ice as an ingredient, or another effective means. The green chile salsa being cooled in deep containers were transferred to shallow containers to allow for rapid cooling. Corrective Action: Corrected at time of inspection.
Comments/Details
No County legal action will result from this inspection.
Of Note: Discussed with PIC 1) chemical sternos shall be stored low and in a way to prevent contamination of foods, food contact surfaces and single use containers. 2) Also discussed that open top sandwich prep tables shall utilize empty hotel pans to prevent rapid loss of temperature on TCS items in the unit to ensure maintaining items at 41*F or less.
"A" for Food Safety
Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.
How does it work?
The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.
How can I determine the grade?
The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.
Definitions
- Priority Violation
- Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
- Priority Foundation Violation
- Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
- Core Violation
- Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
- Cutting Edge Program
- All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
| Violation Category | Grade A | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade B | Grade C | Grade C | Grade C | Grade C | Grade C | Grade C | Grade D | Grade D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Priority | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 2 | 2 | 2 | more than 2 | more than 3 |
| Priority Foundation | 0 | 1 | 2 | 3 | 4 | 0 | 1 | 2 | 5 | 3 | 4 | 0 | 1 | 2 | more than 3 | more than 0 |
Any legal action for a pattern of non-compliance or permit suspension results in a D.