Inspection Report

Business Name
Barbon Asadero
Business Address
343 E MONROE AVE BUCKEYE AZ 85326
Permit Number
FD2405508
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
8/7/2026
Grade
Not Participating
Priority Violation
1
Inspection Status
Completed

Violations

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14 - Priority: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.

Addl Notes: Cooked rice with internal temperatures between 56 degrees F and 65 degrees F that was date marked 8/6 that was cold holding in the reach-in cooler. PIC stated that the rice was made yesterday and cooling temperatures were not verified. Rice was discarded at time of inspection. Cooked rice and beans with internal temperatures between 101 degrees F and 105 degrees F were covered and holding on the counter at the end of the kitchen service line. PIC stated that the beans/rice were cooked this morning and entered the cooling process at about 10am. Due to time remaining in the cooling process, the establishment will re-heat the beans and rice to 165 degrees F and start the cooling process over again. Ensure the rice and beans are placed into a cooler or ice bath once they reach 135 degree F and are stirred frequently to bring down the internal temperature. Cooked TCS foods must be cooled from 135°F to 70°F within 2 hours, and from 70°F to 41°F within 4 hours for a total of 6 hours for cooling. Corrective Action: Corrected at time of inspection.

Comments/Details


No County legal action will result from this inspection.
Discussed cooling methods, cooling, and food manager certifications with the PIC.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.