Inspection Report

Business Name
Haymaker Verrado
Business Address
20990 W SENTINEL DR BUCKEYE AZ 85396
Permit Number
FD2500645
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
3/13/2025
Grade
Not Participating
Priority Violation
2
Inspection Status
Completed

Violations

Violation #: 16

Description: Food-Contact Surfaces: Cleaned and Sanitized

Comments:

PRIORITY VIOLATION-4-501.114 (A-E) - Priority: Manual and Mechanical Warewashing Equipment, Chemical Sanitization- Temperature, pH, Concentration and Hardness. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4574/AMC-Toolbox---Food-Contact-Surfaces.

Addl Notes: Observed ware washing machine (in use) to be providing a chlorine concentration of <50ppm, and a maximum temperature inside machine at plate level of 102.*F. Machine was re-run and observed that sanitizer bucket appeared to be empty. Sanitizer was replaced and machine was run several times and chlorine concentration measured to be 50-100ppm, maintain. Advised person in charge to re sanitize all items that had been through machine today. Provided ware washing machine log. Corrective Action: Corrected at time of inspection. Predefined Comment: Food-contact surfaces must be properly sanitized after washing and rinsing. Predefined Comment: Discussed the importance of proper sanitizer levels and proper monitoring of sanitizer levels. Predefined Comment: When food-contact surfaces are being sanitized with hot water in a dish machine, the surface temperature must reach at least 160°F as measured by an irreversible registering temperature measuring device to destroy pathogens that may remain on such surfaces after cleaning. Predefined Comment: Food-contact surfaces were properly sanitized at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 20

Description: Proper Cooling Time and Temperatures

Comments:

PRIORITY VIOLATION-3-501.14 - Priority: Cooling. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling.

Addl Notes: Observed sausage gravy in pan that was cooked yesterday with internal temperature measured to be 48*F. Per person in charge gravy has not been out of cooler today (all other items in cooler 41*F and below) and no cooling log was completed for this item. Discussed cooling methods. Predefined Comment: All TCS foods improperly cooled were discarded by PIC at time of inspection. Predefined Comment: Cooked TCS foods must be cooled from 135°F to 70°F within 2 hours, and from 70°F to 41°F within 4 hours for a total of 6 hours for cooling. Corrective Action: Corrected at time of inspection.

Comments/Details


Predefined Comment: No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.