Inspection Report

Business Name
New China Gate
Business Address
7730 E MCDOWELL RD SCOTTSDALE AZ 85257
Permit Number
FD2501635
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
3/25/2026
Grade
Not Participating
Priority Violation
1
Inspection Status
Re-inspection required

Violations

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Observed pooled eggs at 48*F, cooked chicken at 52*F, cooked beef at 48*F, cooked shrimp at 50*F, cooked peas and carrots at 48*F, bean sprouts at 48*F, and sliced cabbage at 47*F located in the small cold holding unit at the cook line, per PIC was placed into the unit at 11am-12pm. Ambient air temperature of the unit was 52*F with a min/max thermometer. Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. All TCS foods improperly cold held were discarded by PIC at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 28

Description: Toxic Substances Properly Identified, Stored, and Used; Held for Retail Sale, Properly Stored

Comments:

7-202.12 (C) - Priority Foundation: Conditions of Use; Pesticides by certified applicator Addl Notes: Observed a rodenticide stored in the back of house underneath the hand sink located in front of the walk-in cooler. All pest control for the establishment must be performed by a certified pest control specialist and chemicals for pest control must not be stored onsite. PIC removed pest control chemicals from premises at time of inspection. Corrective Action: Corrected at time of inspection.

Violation #: 33

Description: Proper Cooling Methods Used; Adequate Equipment for Temperature Control

Comments:

4-301.11 - Priority Foundation: Cooling, Heating, and Holding Capacities-Equipment. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4617/AMC-Toolbox---Cooling. Addl Notes: Observed an ambient air temperature of 52*F utilizing a min/max thermometer in the only reach in cold holding unit at the cook line. Cold holding equipment must have the capacity to maintain TCS foods at 41°F or below. Must repair cold holding equipment such that it maintains TCS foods at 41°F or below. In person reinspection will be on Friday, April 3rd. Corrective Action: Correct prior to re-inspection.

Comments/Details


No County legal action will result from this inspection.

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
A B B B B B B B C C C C C C D D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 2 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 3 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.