Inspection Report

Business Name
Chef Panda
Business Address
15601 W BELL RD SURPRISE AZ 85374
Permit Number
FD2502813
Permit Type
Food Establishment - Eating & Drinking
Inspection Purpose
Food Routine Inspection
Inspection Date
7/7/2026
Grade
Not Participating
Priority Violation
1
Inspection Status
Completed

Violations

Violation #: 15

Description: Food Separated and Protected

Comments:

3-302.11 (A3-8) - Core: Packaged and Unpackaged Food-Separation, Packaging, and Segregation; General Food Protection. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you. https://www.maricopa.gov/4621/AMC-Toolbox---Cross-Contamination. Addl Notes: Raw beef skewers on plate found stored above covered ready-to-eat (RTE) foods in tall refrigeration unit on cook line. No signs of overhead contamination witnessed at time of inspection. Predefined Comment: All raw animal proteins must be stored below ready-to-eat (RTE) foods and stored according to cooking temperature at all times to prevent cross contamination. PIC properly stored all raw animal proteins according to the final cooking temperature based on the cooking parameters in § 3-401.11 of the Food Code. Corrective Action: Corrected at time of inspection.

Violation #: 22

Description: Proper Cold Holding Temperatures

Comments:

PRIORITY VIOLATION-3-501.16(A)(2) and (B) - Priority: Time/Temperature Control for Safety Food, Cold Holding. For a permanent fix to this violation, check out these simple tools in our Active Managerial Control Toolbox, made especially for you.https://www.maricopa.gov/4576/AMC-Toolbox---Cold-Holding.

Addl Notes: Cooked noodles, cooked shrimp, shredded cabbage, and diced cooked beef found in open top M3 food preparation cooler at internal temperatures ranging from 47*F - 52*F. Ambient air temperature of unit at 47*F. Predefined Comment: Except during preparation, cooking, cooling or when time is used as a control all TCS foods must be maintained at 41°F or below. Eggs not treated to destroy Salmonellae can be stored in equipment that maintains an ambient air temperature of 45°F or below. Per PIC, unit was holding foods at proper cold holding temperature within the last 4 hours. Predefined Comment: All TCS foods improperly cold held were relocated to alternative functioning refrigeration unit to rapidly cool to 41°F at time of inspection. Do not use food preparation refrigeration unit to house TCS foods until unit can maintain foods internally at 41*F or below. Corrective Action: Correct prior to next routine inspection.

Violation #: 47

Description: Food and Non-Food-Contact Surfaces Cleanable, Properly Designed, Constructed and Used

Comments:

4-501.11 - Core: Good Repair and Proper Adjustment-Equipment Addl Notes: M3 food preparation refrigeration unit on cook line found at internal ambient temperatures at 47*F. Cold holding units must maintain all TCS foods at 41°F or below. Do not use unit to house TCS foods until unit can maintain TCS foods at 41*F or below. Predefined Comment: All equipment must be maintained in good repair at all times. Repair all equipment to a state of good repair prior to next routine inspection.

Comments/Details


Predefined Comment: No County legal action will result from this inspection.
Reviewed facility's procedures and protocols for:
--Contamination Prevented during Food Preparation, Storage and Display (i.e. - protected from contamination in clean, dry location 6 inches above floor); _______
--Plumbing Installed; Proper Backflow Devices (i.e. - mop sink/hose); _______
--Adequate Ventilation and Lighting; Designated Areas Used (i.e. - designated area for personal items)
_______________________
Provided following MCESD handout(s) via email:
--New Owners Packet

"A" for Food Safety

Through our grading system, Maricopa County Environmental Services Department provides at-a-glance indications of how food establishments perform during food safety inspections. This system is designed to grade food establishments in terms of food safety requirements and provide recognition to those who choose to participate.

How does it work?

The issuance of grade cards to food establishments is based on voluntary participation. The person in charge, who is present during the inspection, will be asked whether they would like to participate in the Grading System. This will be decided prior to each inspection. If an establishment does not participate in the Grading System, Not Participating or NP will appear on the inspection report, and the inspection will still occur. If an establishment does participate, a grade of A, B, C, or D will be determined at the conclusion of the inspection using the Grading System chart below. Participating establishments will then be provided with a grade card that can be posted in the establishment. The status of the establishment’s grade will also appear on the Restaurant Ratings page of the department’s website.

How can I determine the grade?

The Grading System chart can be used to determine grades earned for establishments that do not participate. Grades are determined by the number of Priority and Priority Foundation violations received at the time of inspection. Violation types are defined in general terms below.

Definitions

Priority Violation
Major violation that directly contributes to increasing the risk of foodborne illness or injury (e.g. Food employees do not properly wash hands when required).
Priority Foundation Violation
Minor violation that does not directly contribute to an increased risk of foodborne illness but failure to correct this violation may lead to the occurrence of a priority violation. For example, hand washing soap and paper towels not available at hand wash sink (may lead directly to food employees not properly washing hands when required).
Core Violation
Minor violation that relates to general maintenance and sanitation (e.g. No sign reminding employees to wash hands).
Cutting Edge Program
All county food-related establishments can partner with Maricopa County to implement a proactive approach to reducing foodborne illness risk factors by implementing food safety systems that include policies, training, and verification processes. Partners enrolled in the Cutting Edge Program receive an A+ when an A is earned.
Grading System The matrix below is used to grade food inspections under the voluntary grading system.
Violation Category Grade A Grade B Grade B Grade B Grade B Grade B Grade B Grade B Grade C Grade C Grade C Grade C Grade C Grade C Grade D Grade D
Priority 0 0 0 0 0 1 1 1 0 1 1 2 2 2 more than 2 more than 3
Priority Foundation 0 1 2 3 4 0 1 2 5 3 4 0 1 2 more than 3 more than 0

Any legal action for a pattern of non-compliance or permit suspension results in a D.